How to fix No Service on iPhone 3GS, iPhone 4 iOS 5.1

Tuesday, March 20, 2012 | How tos | ios 5.1 | no service Best Blogger Tips
If you have updated your iPhone 3GS or iPhone 4 to iOS 5.1 (with preserved unlockable baseband) and still getting no service after installing ultrasn0w from Cydia, you have come to the right place.

Since the release of iOs 5.1 an it's jailbreak, dev team has not updated ultrasn0w to be compatible with iOS 5.1 and this is the reason why you are still getting no service even after installing ultrasn0w from Cydia. While you wait for the dev team to update ultrasn0w, you can make things go good right now by installing ultrasn0w fixer from Cydia that will unlock your iPhone 3GS or iPhone 4 in no time.

Compatible basebands for unlock with ultrasn0w:

iPhone 4 
1.59.00

iPhone 3GS
4.26.08
5.11.07
5.12.01
5.13.04
6.15.00

To check baseband of your iPhone, go to Settings >> General >> About >> Modem Firmware.

Now let's unlock your iPhone. Before proceeding, uninstall ultrasn0w from Cydia and eject your sim card.

Step 1: Open up Cydia and go to Manage >> Sources. Tap Edit and then Add and write down the following

http://repo.iparelhos.com.

Click Add Source.

Step 2: Once the repo has been added, search cydia for ultrasn0w fixer for 5.1 and install it.


Step 3: Now search Cydia for ultrasn0w and isntall it.

Step 4: Restart your iPhone and insert your sim card. Since the jailrbeak for ios 5.1 is tethered in nature, you will need to boot it tethered. To do so, open redsn0w [Download Redsn0w] and go to Extras >> Just Boot.

That's it. Your iPhone should get service by now. If it still shows no service, let me know in the comments section below.


Share

107 comments:

Anonymous said...

Redsnow won't allow me to "boot tethered" with out 5.1 firmware selected as default build.(manually selected ipsw)

Will boot after the firmware is selected through redsnow, but still no service after reboot.

Toni on Sunday, March 25, 2012 said...

Hi,

I´ve restored my Iphone 4 with using itunes and a redsn0w customized no_bb -ipsw. I also did jailbreak my phone using the very same redsn0w and installed cydia into it. Then I added the url mentioned above and looked for the ultrasn0w 5.1 fixer and installed it. After that I looked and installed the ultrasn0w and rebooted my phone using redsn0w.

I still get the no service text on the left upper corner...

Need help.

-Toni-

Anonymous said...

@Toni
is your iPhone 4 on 1.59 baseband?

jas on Thursday, March 29, 2012 said...

i have iphone 3gs with 6.15.00 baseband and old bootrom... but still it wont get any service... any sugestions? please... running on ios 5.1

Anonymous said...

was it getting service on previous ios?

elaraj on Friday, March 30, 2012 said...

hi i have iphone 4 bb 1.59

i did coustom firmware for 5.1 then i jailbreak it

i install ultrasnow and ultrasnow fixer

i got signal but the upper show me only one bar before with version 4.0 was full at same place

kmp on Monday, April 02, 2012 said...

my iPhone 3gs is with 6.15.00 modem firmware and old bootrom. the only change after this process is that I have "Searching..." (all the time) instead of "No Service." Any ideas?

iamazad24 on Thursday, April 05, 2012 said...

Hi, I got the signal but I see only one bar of the network. Any ideas ? Thanks.

Anonymous said...

Hello. I have the same problem that kmp. I've got the message "searching" all the time but no connection. Although i got my whatsapp running and everytime i change the sim, whatapp ask me if i want to change my number, so, in a way it detects the change of sims.

Thank u!!

Ramon on Friday, April 06, 2012 said...

No need to reboot Your iphone (3gs) after install fixer and ultrasn0w. Just put sim card back in and wait a few seconds. Tested.

Ramon on Friday, April 06, 2012 said...

No need to reboot Your iphone (3gs) after install fixer and ultrasn0w. Just put sim card back in and wait a few seconds. Tested.

Techgirl said...

Hi, is there a way to downgrade the baseband from 04.11.08?

Jocky Skin on Friday, April 06, 2012 said...

@Techgirl No there is no way to downgrade 4.11.08

Anonymous said...

perfect works for me thxxxx

Anonymous said...

works thanks

leoalilion on Friday, April 06, 2012 said...

Sir, I just wanna say "Yaaaaahoooooo" i love u, i love u, i love u, i love u, i love u, i love u, i love u, i love u, i love u, i love u, i love u, i love u, i love u, i love u, i love u, i love u, i love u, i love u, i love u, i love u, i love u, i love u, i love u, i love u, i love u, i love u, i love u. THANK U. I was struggling since two days. At last i'm able to run ios5.1 on my iphone. Thanks a lot.

Jocky Skin on Friday, April 06, 2012 said...

For those who are not getting service even after following this guide, just wait for few days as dev team will update ultrasn0w to be compatible with ios 5.1

Anonymous said...

worked! :D
thanks a lot mate


using iphone 3GS baseband 5.13.04


naveen

Anonymous said...

works like a charm..thanks dude :)

Steveb on Wednesday, April 11, 2012 said...

have followed this procedure but is just keeps on searching:
Iphohe3GS
baseband: 5.16.05

=> upgraded to 5.1
=> jailbreak with redsnow
=> unlocked
=> installed ultrasnow fix
=> installed ultrasnow
=> rebooted
=> still no signal

Anyone?

Anonymous said...

@Steveb Baseband 5.16.05 is not unlockable...

Jacob said...

Hi, I jailbroke my iphone 4 using redsn0w and unlocked it after. I followed all of your steps, and it still didn't fix the "No Service" problem. What should I do now? Thanks in advance for the advice.

Anonymous said...

@jacob what is the baseband of your iPhone 4? is it 1.59.00?

Leonid on Thursday, April 12, 2012 said...

Hey! I had no service, I did all of those things, and now it sais searching. Mine is Baseband 5.16.05 and I read here it's unlock-able, so what should I do? Can I downgrade? I am ready for anything! Please, help!

Admin on Friday, April 13, 2012 said...

@leonid..No, baseband 5.16.05 is not unlockable...you will have to flash ipad baseband i,e 6.15.00 on your iPhone 3Gs if you want to unlock it...but be WARNED! If you have iPhone 3GS 16 or 32 GB that was made after week 35 of 2011 or a new 8GB iPhone 3GS made after week 28 of 2011, don’t install iPad baseband on it as it will brick your iPhone,

Dina on Friday, April 13, 2012 said...

i'm on 06.15.00 baseband and its not working :( I keep getting stuck in "searching..." and "no service" mode. any advice?

Anonymous said...

Something for 3GS users with BB 06.15.00 who still can't unlock their iPhones. I did full restore and JB, followed the instructions and it worked. Here are some links below how to fix it:

http://www.iphoneinformant.com/2012/04/06-15-00-ios-5-1-iphone-3gs-unlock-fix-video-no-servicesearching-issue/

http://everythingapplepro.net/?p=547

PS.
This fix includes changing your iPhone baseband to iPad baseband.

Anonymous said...

@dina Just fresh retstore ios 5.1 and install ipad baseband again..it will work

snake84 on Friday, April 13, 2012 said...

hi iv got the no service on the top corner but where u say to resolve it by going into cydia,i cant even get on my phone because i cant get past the activating my iphone at the start after restoring it. iv restored the iphone many of times and i turn the phone on and its stuck on the activating it. could you please help me with any information or anyone help me. i have an iphone 3gs

my email is robert.laws@hotmail.co.uk

much obliged

snake84 on Friday, April 13, 2012 said...

hi iv got the no service on the top corner but where u say to resolve it by going into cydia,i cant even get on my phone because i cant get past the activating my iphone at the start after restoring it. iv restored the iphone many of times and i turn the phone on and its stuck on the activating it. could you please help me with any information or anyone help me. i have an iphone 3gs

my email is robert.laws@hotmail.co.uk

much obliged

Admin on Friday, April 13, 2012 said...

@snake85 use this guide to jailbreak your iphone 3gs http://www.ibl0g.com/2012/03/jailbreak-ios-51-iphone-4-3gs-ipad-1.html

after that you would have passed the activation process

snake84 on Friday, April 13, 2012 said...

thank you i hope it will work

Rimis on Saturday, April 14, 2012 said...

Hi, i did all steps, but still is writing SEARCHING/NO SERVICE/LOW SIGNAL-1BAR. my iphone 3gs is new bootrom, baseband is 06.15.00. I tried to restore ios few times, did jailbreak with installing cydia with ipad baseband as well few time. tried to install first ultrasnow than ultrasnow fixer, but every time the same problem. Any solutions? Please help!

snake84 on Saturday, April 14, 2012 said...

you are a legend mate. but please tell me what do i have to do now to stop it from happening again and that the factthe jailbreak i have just performed is a tethered and have to boot it everytime. i need do to remove the jailbreak you see as i am selling the phone

much obliged

Anonymous said...

@snake84 If you remove the jailbreak, you will again get stuck on activation screen..so jailbreak is your only option

Admin on Saturday, April 14, 2012 said...

@Rimis...Many iPhone 3gs users are having this problem...Try once more and if it still doesn't work, you will have to wait for the dev team to update ultrasn0w to be compatible with ios 5.1

Rimis on Saturday, April 14, 2012 said...

@Admin... need to try one more time :( maybe you know when is coming updated ultrasnow?

Rimis on Saturday, April 14, 2012 said...

and maybe you know, what can be a problem with microphone, its very quiet when i`am talking and disappearing sound, i changed a charging port, but problem was a same?any solutions?

snake84 on Saturday, April 14, 2012 said...

is there no way i can make it an untethered jailbreak so i can turn it off without having to reboot it

Admin on Saturday, April 14, 2012 said...

@snake84 No there is no untethered jailbreak for ios 5.1 yet...try downgrading back to 5.0.1 (if you have SHSH blobs saved)

Admin on Saturday, April 14, 2012 said...

@Rimis Ultrasn0w will be updated within two weeks, I guess. and about the microphone question, I suspect there is a hardware problem in your iPhone

Ram said...

hi
my name is Ram and i have iphone 4 and modem firmware 04.12.01

installed 5.1 and jail braked with redsn0w_win_0.9.10b6

and clicked "just boot" and even then no service.... wat to do???? plzzz help

me staying in INDIA and using AIRTEL sim

Thanks in Advance
Ram

snake84 on Sunday, April 15, 2012 said...

so what your saying is once there is an untethered jailbreak for ios 5.1 ill be able to go over the tethered jailbreak

Anonymous said...

@RAM unlock for 4.12.01 baseband is not available

Admin on Monday, April 16, 2012 said...

@snake84..Yeah but untethered jailbreak for 5.1 is not coming anytime soon...

Rimis on Monday, April 16, 2012 said...

hi, how to unlock iphone 4 02.10.04 baseband? ultrasnow can unlock this one or no?

Admin on Monday, April 16, 2012 said...

@rimis 2.10.04 is a iPhone 4S' baseband...and no, it cannot be unlocked using ultrasn0w but can be unlocked using R-SIM III

Rimis on Monday, April 16, 2012 said...

@admin, my iphone is 4, not 4`s, baseband is 02.10.04. i can unlock only with R-SIM III? maybe its possible to downgrade to 01.59.00 baseband?

Admin on Monday, April 16, 2012 said...

@Rimis oh sorry..My bad..no, you cannot downgrade your baseband but you can use gevey sim to unlock 2.10 baseband...

Rimis on Monday, April 16, 2012 said...

@admin, yes its cheap m8, only few pounds :)

snake84 on Monday, April 16, 2012 said...

do you no when that will be and how do you downgrade without it breaking

Admin on Tuesday, April 17, 2012 said...

@snake84 I have no idea about the ETA of untethered ios 5.1...and for the downgrading process, the following guide will help you out

Downgrade ios 5.1

Juan on Tuesday, April 17, 2012 said...

Is there any hope that sometime soon it'll be possible to unlock an iPhone 4 with baseband 04.12.01? Or, if not, is there's anything I can do to change or downgrade the baseband? I just got this iPhone with 5.1, so I don't have any blobs to downgrade it to another iOS.

Thanks,
Juan

Anonymous said...

@Juan There is now news regarding 4.12.01 yet and there is no way to downgrade the baseband...feel sorry for you

Juan on Tuesday, April 17, 2012 said...

@Anonymous Oh well, I guess now I have to go beg to the carrier... Thanks for the info.

Anonymous said...

@juan if you have iPhone 4 from At&t, you can get it unlocked fro free...just call them

Anonymous said...

Thanks it works for me , i did not have to reboot or install redsnow . unistall ultrasnow, install ultrasnow fix , and then install ultrasnow . got signal on my phone. thank you

Vick the virus on Tuesday, April 17, 2012 said...

thank lot for whole info at less not only me got a same prob ,,,,thank again i can settle down my self until dev team come as the hero

Bill said...

3GS - Jailbroken - 5.1 - 06.15.00 baseband

In Belgium on Belgacom, NO SERVICE

I see it is a problem with a lot of people.. is the best solution to just call AT&T (Pretty sure that is what it was.)

I don't get it though, my 'criteria' matches everything and this should be working.

Bill (second post) said...

Also, I do have Ultrasn0w Fixer and Ultrasn0w installed correctly and in that order. I have followed every step to a 'T' on all of these youtube videos.

No Service / Searching...

Anyone with an idea what it could be? I've also tried just about every other 'tip' i've read on blogs like these as well.

Bill #3 said...

Update #3:

Now it recognizes when i don't have a sim card and says "NO SIM", the moment i put a card in, it says no service.

That problem was fixed after putting it in airplane mode for a minute or so.

But now I need it to recognize my sim card.

Anonymous said...

@Bill maybe you should wait for ultrasn0w to comeout which will be compatible with ios 5.1

Bill said...

@Anonymous

I have the latest Ultrasn0w.. 1.2.5.. it says for 5.1 in Cydia..

Anonymous said...

@Bill no, ultrasn0w is not yet compatible with ios 5.1

ken on Friday, April 20, 2012 said...

not works, my iphone 4 is ios 5.1 with 04.12.01 firmware.

Admin on Friday, April 20, 2012 said...

@ken iPhone 4 baseband' 4.12.01 is not unlockable using ultrasnow..the only iPhone 4 baseband that ultrasn0w support is 1.59.00

micael simão on Friday, April 20, 2012 said...

PERFECT (=
thank you (=

MHinvegas on Sunday, April 22, 2012 said...

Worked perfectly after a bit of frustration trying to do it without your fixer. Thanks man, your a life saver!

saddu777 on Monday, April 23, 2012 said...

Dear,my prob is not different then above users.I have baseband 04.12.01, ios 5.1(9B176). I have orignal sim which works in switzerland but other simcards work not. i've jailbreaked, installed SAm, ultrasnow +fix. Is it possible to use orignal sim(orange) to unlock for other network (plz dont say for asking unlocking by orange).Any tip,trick or track ?
Thanks

Anonymous said...

I have same problem 3gs old bootrom i get 3 bars and says t-mobile but when i hold the phone the bars disapear and says searching set the phone down bars come back any ideas would be great

Anonymous said...

its on 5.1 with 6.15 baseband

Anonymous said...

IN SPANISH:
BUENO JOVENES YO ESTOY EN LA FILA ESPERANDO EL PROCESO SE HIZO TODO AL PIE DE LA LETRA COMO SI SIGUIERA LA RECETA UN MEDICO Y AUN ME DICE ¨NO AY SEÑAL¨ ESTOY SEDIENTO A LA ESPERA QUE ME SORPRENDA COMO QUE SI DE ESO DEPENDIERA MI VIDA PERO LA ESPERANZA ES LO ULTIMO QUE SE PIERDE DECIA MI ABUELA DEMOLE UN RATO A VE QUE PASA GRACIAS DE ANTEMANO POR TODO SUS EZFUERZO.

Anonymous said...

Hi
I have Iphone 4.0, IOS 5.1 with modem firmware 04.12.01.
I followed exactly the described steps with redsn0w but the NO SERVICE message is still there.
Do you have any suggestions how to activate the network?

Thanks

Bob said...

@Bill: Having the exact same problem and I don't know what to do.

Arul said...

For people who are still having issues, even after installing the ultrasnow fixer, make sure that you first Install the Fixer and then the ultrasnow. If you have already installed the ultrasnow, uninstall it totally, then install the fixer and then finally the ultrasnow. This should resolve the no service issue, however the signal bars would drop down drastically to one or two.

neetika on Thursday, May 03, 2012 said...

i have iphone 4 with version 5.0.1 and modem firmware 04.10.1 it shows no service again and again.it works for few hours den again shows no service den i have to switch it off and den on den hv to repeat all the steps of gevey sim.sometimes it works for many hours bt sometimes d network dropped after 10 mins.pls help me..its about 2 months m having this prob..

Rimis on Monday, May 07, 2012 said...

Hi guys, i solved my problem with no service/searching with my iphone 3gs ios 5.1
i tried to reinstall ios 5.1 few times, jailbreak few times, but it was still no service. and finally today i downloaded new jailbreak tool: redsnow 0.9.10b8b and finally got success, before was using redsnow 0.9.10b6!! :)

Anonymous said...

hi guys i have a problem i am on iphone4 IOS 5.1 jailbreak bb 1.59.00 i install ultrasnow fix and ultrasnow but i have one bar network !!!

Anonymous said...

also do a boot with. booty 2.3.5 for ios5.1 it works well with Snowbreeze. and its uploaded ispw.

lilrandy80 on Monday, May 14, 2012 said...

Lilrandy says: Well I have an 3GS iOS 5.1.1 bb 6.15.00 I install ultrasnow fixer and ultrasnow and still no signal I get no service. iTunes read my phone number but my phone says searching and then goes to no service any help

Anonymous said...

It's worked !!!
iPhone 3gs/ upgrade to ios 5.0.1(9A405)/ BB 06.15.00

Thank you

Charlie said...

@lilrandy80

I have 3GS running iOS 5.1.1 on 6.15.00 baseband and i have no problems with the signal. Just download ultrasn0w fixer for 5.1.1 and reboot your phone!

Anonymous said...

I can't download the repo because of a bad URL error? HELPPP
iOS 5.1 3GS 6.15.00

Anonymous said...

ti amo anch'io amooooooooooooo
grazieeeeee

Anonymous said...

hi,
i have an iphone 3gs with 5.1.1 and bb 05.16.05..and can someone tell me if there is a way to unlock it..the problem is that it was made 146..past the 28th week...and i jailbreak it with absithen..is there's something being done to unlock these phones?? i know i cant change the bb to ipad's...i just want to know if there is somehting going on?? are they working on it?

Admin on Saturday, June 02, 2012 said...

@above person this might help you out http://www.jailbreakwizz.com/2012/06/what-is-ipad-061500-baseband-why.html

Craig Wells on Sunday, June 03, 2012 said...

hi i have iphone 3gs new bootrom 5.1.1 6.15.00 and have installed ultrasnow and still no look please please please help me

Craig Wells on Sunday, June 03, 2012 said...

sorry i meant still no luck with the signal issue

Anonymous said...

I Have Iphone 3gs 5.1.1 with bb 06.15.00
I used snowbreeze 2.9.5 to jailbreak my iphone.
i created ipsw using snowbreeze and restore my iphone using itunes
(note: Press LShift then click on restore iphone)
After that choose the ipsw you created using snowbreeze. and you will unlock ur iphone! after that install ultrasnow ( Latest ver ) and ultrasnow fixer on cydia and you will have signal bars!!

Anonymous said...

Search the Ultrasnow Latest version using cydia search and go at cydia>manage>edit>add source> add "repo.iparelhos.com" then install ultrasnow fixer!

Anonymous said...

Right 1st thing 1st take a minute,to stop and think,I updated iPhone 3GS to 5.1.1 installed iPad baseband 6.15.00,and had all the problems your all talking about,tried everything,then simply,just restored in iTunes,downloaded restore version of 5.1.1,then restored to this also re jail broke with red snow and installed iPad baseband again.... But this time I put a tmobile sim in and that worked right away,left this in for about 1 hour made a few calls and then,put it to airplane mode and then put any sim in I'v used Vodafone for the last 2 weeks without problems,hope this helps

Anonymous said...

HI I have an iphone 3gs with 5.1.1 with modem firmware 05.16.05 after jalbreak and its on no service or searching all the time before upgrade was on modem firmware 05.13.04 and 4.2 working perfectly I have tried almost everything and I can't make it work please help.

Anonymous said...

Hi 3gs with 5.13.04 still no service

Thanks in advance

Umer on Saturday, June 30, 2012 said...

Yes!!! It worked! I tried everything and I thought I just had a bad phone or a messed up antenna. but the problem was that it just took longer to search for the carrier.

If it searching for one and says "no service" then it says "searching" right away, that's a good thing, it means it will eventually find it. Leave it for 10 minutes or more. I was going insane and didn't know I just needed to leave it longer.

disseminate on Tuesday, July 17, 2012 said...

Okay, I never post. As public service here was my solution.

I have a "newer" post week 45 or whatever it questions you with. I screwed up and updated to 5.1.1 via iTunes. It had 4.x.x on it and was unlocked and jailbroken and I got it from a guy that was using it with cingular. I have AT&T. I popped my card in and it worked but service was mediocre.

I updated to 5.1.1 to go "stock" and back to normal although I have had jailbroken phones in the past. I was hoping to obtain better service from the efforts. Anyway, iTunes but on baseband 6.15.00 with the OS update. I used redsnow 0.9.14b2 and added Cydia. I ended up with searching... and No Service. I have spent probably 8 hours over the course of a few days trying to fix it. I went to AT&T and also to Apple and long story short they couldn't help me.

So, newer 3GS which doesn't like 6.15.00 bb apparently. Success came like this:

01 - I used iTunes to do a fresh update to 6.15.00 and iOS 5.1.11
02 - I used redsn0w 0.9.14b2 selected the IPSW (look for guides on how to do a jailbreak/unlock with this) and then selected jailbreak
03 - I unchecked everything except for downgrade broadband and went through that whole process
04 - I then used the same redsn0w again and selected the IPSW per the guides and selected jailbreak
05 - this time I unchecked everything except for install Cydia
06 - it crashed
07 - I ran redsn0w again and repeated steps 04,05
08 - I went and looked at the general-about and it had BB 5.13.04! Also, the id code for the SIM was showing which it wasn't previously.
09 - I did as instructed with the ultrasn0w fixer and ultrasn0w as directed in this post we all have read.

That did it! I hope this helps someone!

Chintan said...

I have IPHONE 3, i have just updated to Firmware 4.2.1, the issue is i am facing tremendous network issues when i m inside my house, this happens only with iphone as i've tried my simcard with other headset where there is excellent coverage. In Iphone, i can't talk or the opposite person is unable to hear my voice. I was facing this problem even when i was having the older firmware i.e. 3.1, please help me

Anonymous said...

Hello
I have been using my unlocked iPhone 4 for almost 2 years and never had problems of NO SERVICE until yesterday. I had restarted my iPhone 4 more than once and even taken the sim card out and nothing. Still NO SERVIE appears. However, I can use WiFi when Im connetcted but has no voice. I dont have no Cydia no Jailbreak installed as I tried to follow your instructions in this link.
What shuold I do? Really need your help...
Thanks!!!

Anonymous said...

Sir, I got my iphone 4 from japan but I'm using it in india. I used it in japan for a while, it worked there. But ever since that i brought it back with me to india, it has started showing the no service error on my vodafone carrier. I installed both the ultra sn0w fixer for 5.1 and ultra sn0w something something..Can you suggest me something in particular?? I'll really appreciate an early reply.

Thank you.

Anonymous said...

hey, i have a iphone 3gs baseband: 06.15.00.

I installed the ultrasn0w fixer for 5.1

but i cant find ultrasn0w when i search for it in cydia.
How do i add it manually ?

Please email me: itzxchamp51o@gmail.com

gus on Saturday, October 20, 2012 said...

I followed all the steps and still No Service...

Anonymous said...

i m using iphone 3 5.13.04 and installed ultrAsnow fixer then also it shows NO SERVICE

Michael Iliscupidez on Monday, November 05, 2012 said...

anyone knows how to downgrade BB 4.12.02 to 1.59.00?? thanks im running on ios6 by the way and iphone 4! locked in Korea but im from Philippines hope anyone can help me!! Thanks a lot fellas!

UnlockBoot on Monday, November 26, 2012 said...

Hey guys, cool post, I tried to factory Unlock iPhone 5 with UnlockBoot and I got it unlocked today. The best service online. Thanks!

Nikoli1803 on Monday, February 04, 2013 said...

i have an iphone 3gs ios 6.1 05.16.08 baseband and keep getting no service, searching, and full signal and it wont make any calls or recieve txts unless im moving about, wtf this is sooooo annoying, someone please help

Lil Mary said...

Thanks!
Running
Iphone 3GS
5.1.1 ipsw
O5.13.04 baseband
jailbroken by redsn0w 0.9.15b3 using local SHSH blob

ultrasn0w was solution for my no service problem.
There is no need to look for Ultrasn0w fixer 5.1 (it does not exist anymore, there is only 6.1),ultrasn0w 1.2.8 has it included.

thanks a lot!

Anonymous said...

Thanks for informative post. I am pleased sure this post has helped me save many hours of browsing other similar posts just to find what I was looking for. Just I want to say: Thank you
Cafeios

Penta Kristal on Sunday, May 19, 2013 said...

still no service :(
iphone 3G, 5.13.04 Basband.

please anyone, mail me at pentakristal@gmail.com

 
Template designed by Unlock iPhone 4 | Factory unlock iPhone 4